- 732 -
ts4b01g thru ts4b07g single phase 4.0 amps. glass passivated bridge rectifiers voltage range 50 to 1000 volts current 4.0 amperes f eatures ul recognized file # e-96005 glass passivated junction ideal for printed circuit board reliable low cost construction plastic material has underwriters laboratory flammability classification 94v-0 surge overload rating to 120 amperes peak high case dielectric strength of 2000v rms m echanical data case: molded plastic weight: 0. 15 ounce, 4 grams mounting torque: 5 in. lbs. max. ts4b dimensions in inches and (millimeters) m aximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol ts4b 01g ts4b 02g ts4b 03g ts4b 04g ts4b 05g ts4b 06g ts4b 07g unit s maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @t c = 115 i (av) 4.0 a peak forward surge current, 8.3 ms single half sne- wave superimposed on rated load (jedec method ) i fsm 120 a maximum instantaneous forward voltage @ 4.0a v f 1.0 v maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =125 i r 5.0 500 ua ua typical thermal resistance (note) r jc 5.5 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to + 150 note: thermal resistance from junction to case with device mounted on 2? x 3? 0.25? al-plate heatsink.
- 733 - ratings and characteristic curves (ts4b01g thru ts4b07g) fig.4- typical reverse characteristics per bridge element instantaneous reverse current .( a) 0 20 40 60 80 100 120 140 0.1 1 10 100 percent of rated peak reverse voltage. (%) tj=100 c 0 tj=25 c 0 fig.1- maximum non-repetitive forward surge current per bridge element peak for ward surge current . (a) 10 5 2 150 20 100 0 25 125 75 150 50 100 175 number of cycles at 60hz 8.3ms single half sine wave jedec method fig.3- typical instantaneous forward characteristics per bridge element instantaneous for ward current . (a) 0.7 0.6 0.8 1.0 0.9 1.1 1.2 1.3 0.1 0.4 4 40 2 20 0.2 1 10 100 instantaneous forward voltage. (v) tj=125 c 0 8.3ms single half sine wave fig.2- maximum forward current derating curve per bridge element average for ward current . (a) 50 0 100 150 0 3 2 1 4 5 case temperature. ( c) o mounted on 4x4 inch copper pc board 0.5"(12.7mm) lead length
|
